10
９．Measurement Data Output
０２００
60.0
Measurement value data in the specified range are externally output in a collective manner.
The baud rate, data length and parity settings should be made consistent with the settings
of the PC to be connected beforehand.
Use the key to set the counter value to the upper limit of
the data range you want to output. Hold down the key
for 2 seconds or longer to display the computation screen.
Press the key to set the starting counter value.
Press the key.
Press the key to cancel.
Press the key to cancel.
Measurement data batch output is carried out.
When you want to interrupt data output, press the key.
The other keys cannot be operated during data output.
After the measurement data batch output,
the LCD will display the data volume again.
If the key is pressed with the data volume being displayed,
the measurement data are collectively output.
To Next Page
Loading...
Need help?
General
