７．Torque Range / Remaining Battery Capacity Display
8
STC50CN2 STC200CN2 STC400CN2
10～50 80～40040～200
0.05 0.50.2
3.75
3.75
15.0 30.0
52.50 210.0 420.0
15.0 30.0
Overtorque Alarm and Peak Hold Start Torque
Remaining Battery Capacity Display Function
Model
Torque Range cN・ｍ
1digit
Peak Hold Start Torque
*
2
Overtorque Alarm*
1
Auto Zero Range*
2
There is a sufficient remaining battery capacity.
The remaining battery capacity has been lowered.
A remaining available time is about half.
It is about time to recharge.
Battery alarm state
The battery remaining capacity has run out. Recharge immediately.
LCD “----” is displayed, allowing only the power switch to be operated.
Once in this state, the power is turned off in one minute.
The stored data and various settings remain if the battery runs out.
*1:MAX Torque 110%
*2:MIN Torque 37.5%
To Next Page
Loading...
Need help?
General
