TomTom Go 520 User Guide

Safety3.
5
Safety
Positioning the dock
Consider carefully where to attach the dock in your car. The dock should not
block or interfere in any way with the following:
• Your view of the road
• Any of the controls in your car
• Any of your mirrors
• The airbag
You should be able to reach your navigation device easily when it is in the
dock without leaning or stretching. The diagrams show where you can safely
attach the dock.
You can attach the dock to the windscreen, side window or use a Dashboard
Mount Disk to attach the dock to your dashboard. TomTom also offers
alternative mounting solutions for your TomTom navigation device. For more
information about Dashboard Mount Disks and alternative mounting
solutions, go to www.tomtom.com/accessories.
Installing the Active Dock
Make sure that both the Active Dock and your window are clean and dry.
1. Press the suction cup firmly against the window on an area where the glass
is flat.
2. Twist the rubber grip near the base of the Active Dock in a clockwise
direction until you hear a click.
The Active Dock is now installed.

TomTom Go 520 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Internal memory	64 MB
Storage capacity	512 MB
Display resolution	480 x 272 pixels
Display size (HxV) (imperial)	4.3 \
Processor frequency	400 MHz
Battery life (max)	5 h

Weight and Dimensions

Depth	24 mm
Width	118 mm
Height	83 mm
Weight	220 g