TomTom Go 520 User Guide

85
3. Tap Advanced if you want to report a specific type of camera, otherwise go
to step 5.
4. Tap the type of camera you want to report.
Note: If the type of camera you choose has a speed restriction, you can also
enter the speed.
5. Tap This side of the road or Other side of the road depending on where the
camera is.
Reporting a new safety camera while at home
You do not need to be at the location of a safety camera to report the new
location.
To report a new safety camera location while you are at home, do the
following:
1. Tap TomTom Services in the Main Menu.
2. Tap TomTom Safety Cameras.
3. Tap Report safety camera.
4. Tap Mobile camera or Fixed camera depending upon the type of safety
camera.
5. Find the location of the camera you want to report using the Map browser, .
Use the cursor to mark the exact location, then tap Done.
6. Tap on the type of camera you want to report and if necessary, the speed
restriction for the camera.
Reporting incorrect camera alerts
You may receive an alert for a camera that is no longer there.
To report an incorrect camera alert, do the following:
1. While you are at the location of the missing camera, tap Report in the
Driving View.
Note: This must be done within 20 seconds of receiving the camera alert.
2. Tap Remove.
Types of safety camera you can report
When you report a safety camera, you can select the type of safety camera
you are reporting.

TomTom Go 520 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Internal memory	64 MB
Storage capacity	512 MB
Display resolution	480 x 272 pixels
Display size (HxV) (imperial)	4.3 \
Processor frequency	400 MHz
Battery life (max)	5 h

Weight and Dimensions

Depth	24 mm
Width	118 mm
Height	83 mm
Weight	220 g