TomTom Go 520 User Guide

Hands-free calling16.
62
Hands-free calling
Hands-free calling
If you have a mobile phone with Bluetooth®, you can use your TomTom GO
to make phone calls and send and receive messages.
Note: Not all phones are supported or compatible with all features. For more
information, go to tomtom.com/phones/compatibility.
Connecting to your phone
First you must establish a connection between your mobile phone and your
TomTom GO.
Tap Mobile phone in the Main Menu and then follow the instructions on the
screen.
You only need to do this once, after which your TomTom GO will remember
your phone.
Setting up TomTom Services
When you have established a connection with your phone, you can set up a
wireless data connection for TomTom Services.
Tips
• Make sure that you switch on Bluetooth® on your phone.
• Make sure that your phone is set to ‘discoverable’ or ‘visible to all’.
• You may have to enter the password ‘0000’ on your phone in order to
connect to your TomTom GO.
• Make your TomTom GO a trusted device on your phone. Otherwise you
have to enter ‘0000’ every time.
See your phone’s user guide for information about Bluetooth® settings.
Your phonebook
You can copy your phonebook from your mobile phone to your TomTom GO
so that you can make calls with just a few taps on the screen.
This is the safest way to make hands-free calls.

TomTom Go 520 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Internal memory	64 MB
Storage capacity	512 MB
Display resolution	480 x 272 pixels
Display size (HxV) (imperial)	4.3 \
Processor frequency	400 MHz
Battery life (max)	5 h

Weight and Dimensions

Depth	24 mm
Width	118 mm
Height	83 mm
Weight	220 g