TomTom Go 520 User Guide

79
In the example, the sidebar shows you that there are two incidents ahead.
To re-plan your route to avoid these incidents, tap the sidebar to open the
TomTom traffic menu, then tap Minimise traffic delays.
Note: To make the Traffic sidebar more readable some incidents may not be
shown. These incidents will always be of minor importance and only cause
short delays.
Making commuting to work easier
The Home to work or Work to home buttons in the Traffic menu lets you
check your route to and from work with one tap of a button. When you use
either of these buttons, your device checks the route for possible delays and
if it finds any, provides you with the possibility to avoid them.
The first time you use Home to work, you must set your traffic home and work
locations, do the following:
You can now use the Home to work and Work to home buttons of the Show
home-work traffic menu.
Note: The home location you set here is not the same as the home location
you can set in the Preferences Menu. In addition, the locations you use here
do not have to be your actual home and work locations. If there is another
route that you often travel, you can set Work/Home to use these locations
instead.
For example, to check for delays on your route home, do the following:
1. Tap TomTom Traffic in the Main Menu.
2. Tap Show home-work traffic.
Change
home-work
1. Tap TomTom Traffic in the Main Menu.
2. Tap Show home-work traffic.
3. Tap Change home-work
4. Set your home location
5. Set your work location.

TomTom Go 520 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Internal memory	64 MB
Storage capacity	512 MB
Display resolution	480 x 272 pixels
Display size (HxV) (imperial)	4.3 \
Processor frequency	400 MHz
Battery life (max)	5 h

Weight and Dimensions

Depth	24 mm
Width	118 mm
Height	83 mm
Weight	220 g