ToolKitRC M6D - Page 10

@ ToolkitRC 2020
10
corresponding channel.
8，Short press [OK], can select the charging task when
the channel is idle and can adjust and end the work
when the channel is working.
9，Press and hold [OK] to enter the system setting
interface when both channels are idle.
10，Press [Exit], to end the modification or return to the
previous interface.
=================================
1，Short press [Scroll Wheel] once， to confirm the
key function
2，Press and hold [Scroll Wheel] for 2 seconds， to
delete the key function
3，If any key is operated successfully, there will be a
di-di prompt tone.
=================================