@ ToolkitRC 2020
===================================
Tips
1，Over-discharging or over-charging of the
connected battery may lead to incorrect recognition of
the battery cell number, and it is necessary to manually
set the correct cell number.
2，If the cell number is set incorrectly, it may not
be fully charged, or the battery may be damaged by
overcharging. Please set it carefully.
3，After Lixx battery is connected to the balance
port, the number of battery cells can be more accurately
identified.
===================================
3，Mode
Move the cursor to [Mode] and press [OK] to
modify the working mode, as shown below:
To Next Page
Loading...
