@ ToolkitRC 2020
voltage, and the range is plus or minus 50mV of the full
voltage. When the working mode is discharge, it is the
discharge cut-off voltage. Scroll the [Scroll Wheel] to
adjust the value in steps of 0.01V.
===================================
1，Only LiPo, LiHV, LiFe batteries can set the end
voltage.
2 ， If not familiar with battery characteristics,
please do not modify the cut-off voltage.
3，The charging cut-off voltage can be set to a
range of plus or minus 50mV of full voltage.
4, Glossary explanation:
TVC: English abbreviation for terminal voltage control
===================================
To Next Page
Loading...
