@ToolkiRC 2021
To end the charge and discharge work, short press
[OK], move the cursor to [Stop], short press [OK], stop
working and return to the main interface.
When charge is complete or charge error occurs. A
prompt box will pop up with a sound.
Display content description:
P1: Power selection in system settings
19.80V: Input power supply voltage
0.0Wh: The accumulated power consumption of
the input power
36.5℃: The internal temperature of the charger
V : Constant voltage sign C: Constant current sign
25.27V: Main port voltage
0.29A: Main port current
000:13: Working hours
To Next Page
Loading...
