Topcon CA-200F - 5 Specifications

CA-200F Corneal Analyser - Rev. 7 16/01/2012
60
5. SPECIFICATIONS
Technical Specifications
KERATOSCOPIC CONE
24 rings equally distributed on a 43D sphere
POINTS ANALYZED
over100,000
POINTS MEASURED
over10,000
CORNEA COVERAGE
0.3mm (minimum diameter on a 43D sphere) to 10.5mm on a normal eye
DIOPTRIC POWER RANGE
1D to over 120D
RESOLUTION
+/- 0.01D, 1 micron
ACCURACY
Axial curvature 0.03mm, altimetric data 2 m at 4mm
FOCUS SYSTEM
Autofocus with autocapture
PUPILLOMETRY
Integrated
FLUORESCENCE
Integrated
OUTPUT PORTS
USB, LAN
Environmental conditions
Operation
Temperature
10-40°C
Relative humidity
30-75% (no condensate)
Atmospheric pressure
700-1060 hPa
Storage
Temperature
10-40°C
Relative humidity
30-75% (no condensate)
Atmospheric pressure
700-1060 hPa
Electrical specifications
Power source
AC 100-240V 47-63 Hz
Power consumption
3.2A
Mechanical specifications
CA-200F
H:320mm
W:455mm
L:250mm
Weight:6.8 kg
CA100/200 chinrest
H:70mm
W:257mm
L:180mm
Weight:0.8 kg
CA100/200 baseplate
H:75mm
W:145mm
L:253mm
Weight:1.9 kg
External computer specifications
Operating system
WINDOWS XP
Processor
Pentium III or later
RAM
256MB ( minimum )
Connections
Wi-Fi or LAN
Software protection
USB key hardware
Internal computer specifications
Operating system
Widows XP Embedded
Processor
Pentium M 1GHz
RAM
512 Mbytes
Connections
Wi-Fi Integrated, LAN Integrated
Software protection
Integrated