Need help?Do you have a question about the Topcon KR-1W and is the answer not in the manual?
General| Brand | Topcon |
|---|---|
| Model | KR-1W |
| Category | Measuring Instruments |
| Language | English |
Safety precautions for patient and instrument operation, including concentration, rest, eye care, and proper installation.
Regular maintenance, checking equipment, ensuring correct reading, and cleaning.
Explains the meaning of WARNINGS, CAUTIONS, and NOTES displays for safe operation.
Instructions for patient safety, operator safety, and device usage limitations.
Guidelines to prevent fire and electric shock hazards, including proper installation and handling of liquids.
Information on EMC compliance and potential effects on nearby devices.
Operation in the arbitrary interface, including measurement mode selection and settings.
Procedures for measurement, including preparation, auto mode, and manual mode.
How to view, list, and analyze measurement results.
Details on configuring various functions and settings via the settings screen.
Instructions on how to interact with the touch panel, including tap and drag gestures.
Instructions for properly installing the instrument, including handling and placement precautions.
Step-by-step guide on how to connect the power cable to the instrument and power outlet.
Details on connecting external devices via RS232C, USB, and LAN interfaces for data output and input.
Instructions on how to open the printer cover, set paper, and close the cover correctly.
Overview of three user interfaces supporting first-time users and skilled operators.
Steps for powering on the instrument and selecting a measurement course.
Details on the characteristics and automatic settings for each examination course.
Steps to prepare for measurement, including ensuring the measurement screen is on and informing the patient.
Detailed steps for performing measurement, including alignment, focusing, and data acquisition.
Procedure for clearing all measurement values, including confirmation prompts and system reset.
Displays a list of measurement results, showing typical values, maps, and data.
How to access and view analysis results after selecting data from the result list.
Displays Corneal and Ocular aberration maps and Simulation.
Sets threshold values for Corneal Irregular Astigmatism, K Readings, SA, and Astig.
Sets threshold values for corneal irregular aberration 1 and 2.
Lowest set threshold for corneal irregular aberration.
Highest set threshold for corneal irregular aberration.
Sets threshold K value for IOL selection map.
Sets threshold value for corneal spherical aberration in IOL selection map.
Sets threshold value for corneal astigmatism in IOL selection map.
Sets the threshold 1 for RMS (4mm) in the IOL selection map.
Sets the threshold 2 for RMS (4mm) in the IOL selection map.
Sets the threshold 1 for RMS (6mm) in the IOL selection map.
Sets the threshold 2 for RMS (6mm) in the IOL selection map.
Settings for output layout of the external printer, including map selection, paper size, and orientation.
Controls RS-232C communication to be turned ON or OFF.
The output data style can be selected.
The communication format can be set.
The speed (baud rate) of RS-232C communication can be set.
Sets the data transfer method (TCP/IP or Shared Folder).
Sets the IP address of the PC connected for data output.
Sets the server port number of the PC connected for data output.
The shared folder of data transferred can be set.
When DATA OUT button is pressed, output of the print image can be set.
When DATA OUT button is pressed, outputting measurement data...
Allows output of the Analysis Result screen.
When DATA OUT button is pressed, data output to PC can be set.
The IP address of KR-1W can be set.
The subnet mask of KR-1W can be set.
The default gateway of KR-1W can be set.
This sets the image format transferred to the shared folder.
This sets the quality of a JPEG image transferred to the shared folder.
Connection with Viewer is checked to display the status.
Sets the Screening measurement course.
Sets parameters for the serial measurement course.
Sets parameters for the cataract measurement course.
Routine daily maintenance tasks.
How to check instrument's measurement accuracy.
Instructions for cleaning the instrument's components.
Procedure for clearing paper jams in the printer.
Step-by-step instructions for safely replacing the fuse.
A checklist of operations to perform before requesting service for troubleshooting.
Lists common problems, check points, remedies, and corresponding page numbers for troubleshooting.
Detailed specifications and performance characteristics of the instrument.
Manufacturer's guidance on electromagnetic emissions and compliance.
Manufacturer's guidance on electromagnetic immunity and compliance levels for various tests.
Explains the operational principle involving light projection, sensors, and computation for measurements.
Specifies the type of protection against electric shocks (Class I).
Specifies the degree of protection against electric shocks (Type B).
Indicates the degree of protection against water intrusion (IPX0).
To Next Page
