Topcon KR-1W - Setting Pupillometry; Setting Serial Measurement; Setting Cataract Measurement

178
SETUP OF SELECTION OF EXAMINATION MEASUREMENT
SETTING PUPILLOMETRY
This sets the puipllometry course.
1 Tap "Pupillometry" in the index to select.
SETTING HARTMANN EXPOSURE TIME
Refer to "SETTING HARTMANN EXPOSURE TIME" in page 176.
SETTING REPORT TYPE
Refer to "SETTING REPORT TYPE" in page 177.
SETTING SERIAL MEASUREMENT
This sets the serial measurement course (Serial).
1 Tap "Serial" in the index to select.
SETTING HARTMANN EXPOSURE TIME
Refer to "SETTING HARTMANN EXPOSURE TIME" in page 176.
SETTING THE FIXATION TARGET
Refer to "SETTING FIXATION TARGET ILLUMINATION LEVEL" in page 177.
SETTING CATARACT MEASUREMENT
This sets the cataract measurement course.
1 Tap "Cataract" in the index to select.
NUMBER OF MEASUREMENT SETTING
Refer to "NUMBER OF MEASUREMENT SETTING" in page 176.
SETTING HARTMANN EXPOSURE TIME
Refer to "SETTING HARTMANN EXPOSURE TIME" in page 176.
SETTING THE FIXATION TARGET
Refer to "SETTING FIXATION TARGET ILLUMINATION LEVEL" in page 177.
SETTING REPORT TYPE
Refer to "SETTING REPORT TYPE" in page 177.
In this course, setting "Number of measurement" and "Fixation illumi. level" are not
allowed.
In this course, setting "Number of measurement" and "Report type" are not
allowed.