182
MAINTENANCE AND CHECKING
SPECIAL NOTE OF CLEANING
CLEANING THE PLACHIDO RING AND OUTER COVER
1 If outer covers, control panel screen and the operation panel are stained, clean them with
a soft dry cloth.
2 If the stain of outer covers is extreme, use a neutral tableware detergent and warm water.
Dip a soft cloth in the solution, squeeze out excess water and then wipe off the stain.
CLEANING THE MONITOR SCREEN (CONTROL PANEL)
Contamination by Dust
Remove the dust with a soft brush, and rub with the attached monitor cleaner.
Contamination by Fingerprints
Rub with the attached monitor cleaner.
If the stain is persistent, moisten the monitor cleaner with water and then wipe off the
stain.
CLEANING THE COMPONENTS TOUCHING THE PATIENT
If the forehead rest and chinrest become stained, use a neutral tableware detergent and warm
water. Dip a soft cloth in the solution, squeeze out excess water and then wipe off the stain.
CAUTION
Do not use or apply any spray-type cleaner near the instrument.
If the cleaner remains inside the measuring nozzle, the
patient's eye may be injured during measurement.
MEMO
As the control panel screen is a touch panel, be sure to turn of the
before wiping. The touch panel will react and mal-
function.
MEMO
When the monitor cleaner has become dirty, wash it. When washing,
rinse it thoroughly so no detergent is left. If the detergent is left, it may
cause uneven wiping.
POWER switch
To Next Page
