Topcon KR-1W - NETWORK Settings: Data Output and Image Format; REF;KRT Data Output Setting; KR-1 W IP Address Setting; KR-1 W Subnet Mask Setting

73
INDIVIDUAL OPERATIONS
INPUT/OUTPUT
OUTPUT USING RS-232C
This instrument can output data to PC and other devices the like via the RS-232C interface.
1 Make sure that the connection is to the RS-232C OUT.
For connection, see "CONNECTING EXTERNAL I/O TERMINALS" on page 32.
2 Check settings for data communication.
For data communication settings, see "SETTING OF DATA COMMUNICATION (COMM)"
on page 168.
OUTPUT USING USB
This instrument can output data to an external printer or PC via the USB interface.
1 Make sure that the connection is to the USB OUT.
For connection, see "CONNECTING EXTERNAL I/O TERMINALS" on page 32.
Check settings for data communication.
For data communication settings, see "SETTING OF DATA COMMUNICATION (COMM)"
on page 168.
INPUT USING USB
This instrument can input data the USB interface.
1 Make sure that the connection is to the USB IN.
For connection, see "CONNECTING EXTERNAL I/O TERMINALS" on page 32.
Check settings for data communication.
OUTPUT USING LAN
This instrument can output data to PC on network via the LAN interface.
1 Make sure that the connection is to the LAN.
For connection, see "CONNECTING EXTERNAL I/O TERMINALS" on page 32.
Check settings for data communication.
For communication settings, see "LAN CONNECTION (NETWORK)" on page 171.
For the usable external printer, ask your dealer or TOPCON at the address printed
on the back cover of this manual.