Topcon KR-1W - Setting Hartmann Exposure Time

51
INDIVIDUAL OPERATIONS
SETTING HARTMANN EXPOSURE TIME
Hartmann exposure time can be selected. Prolonging the exposure time can reduce the mea-
surement error that occurs in the hard-to-measure eye. The default setting is 100ms(Normal).
1 Tap the right side of the Hartmann icon on the control panel, and the pop-up menu is dis-
played for about 3 seconds.
2 Tap the pop-up menu and tap "100ms(Normal)", "300ms", "400ms", or "500ms" to select.
3 Setting is complete.
"100ms(Normal)": The Hartmann exposure time is set to 100ms.(Standard setting)
"300ms" : The Hartmann exposure time is set to 300ms.
"400ms" : The Hartmann exposure time is set to 400ms.
"500ms" : The Hartmann exposure time is set to 500ms.