62
INDIVIDUAL OPERATIONS
4 All the measurement values for right and left eyes are cleared, and the main body will
return to the initial power on position.
TERMINATING MEASUREMENT
1 Turn off the of main body.
2 Clean the forehead rest and the chinrest, then cover the instrument with a dust cover.
When measurement values are cleared by the , the patient
ID may reset, depending on the setting of "RESETTING THE PATIENT ID
(PATIENT ID RESET)" (page 134).
When "Resetting the Patient ID" is "ON":
The patient ID is reset to the initial patient ID set by "Setting the Patient ID" of
"Initial Setting."
When "Resetting the Patient ID" is "OFF":
The patient ID is not reset, and the same patient ID is used.
When measurement values are outputted by the , the data will be
cleared when starting the measurement of the next patient.
When external devices are connected to external I/O terminals, turn off the power
of these devices too.
When the instrument is not used for a long period, unplug the power supply cable,
and detach any cables connected to the external I/O terminal.
If chinrest sheets are used, remove one sheet.
ALL CLEAR button
PRINT button
POWER switch
To Next Page
Loading...
