37
BASIC OPERATIONS
BASIC OPERATIONS
SELECTION OF EXAMINATION INTERFACE AND ARBITRARY OPERATION
INTERFACE
This instrument provides three different user interfaces that support the first-time users as well
as skilled operators.
1 Selection of examination interface
This is the setting to select the measurement course provided according to the examina-
tion purpose after turning the instrument on.
After selecting the measurement course, the measurement procedure, the number of
measurements, and the report output format that are optimal for the examination purpose
are automatically selected.
This is good for the first-time users and those who wish to perform examination quickly.
The following measurement courses are available.
• Screening
• Pupillometry
• Serial (dry eyes)
• Cataract
• Over refraction
•Custom
To Next Page
Loading...
