128
FUNCTION SETTING USING SETTINGS SCREEN
INITIAL SETTING (INITIAL)
INITIAL contains settings related to the initial status upon power on. Measurement functions
including measurement mode, auto mode and the number of continuous measurements, as
well as the display of the measurement results, the date and language can be set.
1 Tap the index "INITIAL" of the "SETTTINGS screen." Set items for initial setting are dis-
played.
2 Tap the and/or , as needed, till the set item to be
checked/changed is displayed.
SETTING OF MEASUREMENT MODE (INIT MEASURE MODE)
The initial measurement mode, at power on, can be changed. Before shipment, the default
setting is "R/K."
1 Tap the of the set item display "Init Measure Mode" of "INITIAL."
2 Tap the and select the desired measurement mode.
3 Setting is done.
To exit from this screen
• Tap the .
• The "SETTTINGS screen" is exited and the "MEASUREMENT screen" is
returned.
EXIT button
Page Feed button Page Feed button
Set Condition button
Setting Change button
To Next Page
Loading...
