Topcon KR-1W - Threshold Setting for Corneal Astigmatism; Corneal Astigmatism Threshold Setting

56
INDIVIDUAL OPERATIONS
Auto print (available only under Auto mode)
When the auto print function is set to "ON" in the initial settings menu, measurements will
automatically print out when the exam is completed.
Note, if the measurement to be performed is set for only the right or left eye (MONO), the
auto print function will not work. For the setting of eyes to be measured, see "
MEASUR-
ING ONE EYE ONLY" on page 52.
It is possible to not automatically move to the position for measuring the other eye after
measuring one eye. For details, see "
MEASURING ONE EYE ONLY" on page 52.
If MONO mode is selected, total measurement is completed after measurement of the
selected eye is performed.
After "FINISH" is displayed, it is possible to continue measurement by pressing the
.
To stop the auto alignment, tap and stop the auto measurement. To
resume the auto measurement, tap .
MEASUREMENT switc
h
MANUAL
AUTO