− 1 −
R-CL300-0-1204-02
1. GENERAL
1-1 Features of the Product
This computerized lensmeter CL-300, which uses the non-imaging system with the two-dimensional CCD, is
proud of a high-speed excellent operability at a low price, where the LCD with the back light has been
employed.
1-2 Specifications of the Product
1-2-1 Measuring Range and Minimum Units
Measuring Range Minimum Unit
(1) Spherical Surface 0 - ±25D 0.01D, 0.12D, 0.25D
(2) Cylindricality 0 - ±10D 0.01D, 0.12D, 0.25D
(3) Prism Refractive Power Horizontal direction 0 to 13∆ Vertical Direction 0 to 18∆
(4) Axial Angle 1 - 180° 1°
(5) ADD Frequency 0 - +10D 0.01D, 0.12D, 0.25D
(6) UV Penetration Rate Measurement 0 - 100% 1%STEP 5%STEP
1-2-2 Diameter of the Lens to be tested
: φ5 - φ100mm
1-2-3 Contact Lens
: 0 - ±25D
1-2-4 Measurement Pixels
: 1/3 inch/two-dimensional CCD
1-2-5 Display Pixels
: Color Liquid-Crystal TFT Touch Panel with 320×240 dots and LED Back light
1-2-6 Source Voltage
: 100-240V 50 - 60VA 1.2A
1-2-7 Outside Dimensions
: 197 (W) × 220 (D) × 404 (H) mm
1-2-8 Weight
: Approx. 3.8 kg
1-3 Users of this Repair Manual
The repair of this instrument should be performed only by those who have the skills and experience of
assembling and adjusting the optical equipment, Other persons are recommended to take the repair training
course at TOPCON CORPORATION.
To Next Page
Loading...
