− 5 −
R-CL300-0-1204-02
(4) The above “SPECIAL MENU” will be displayed.
Press the LCD screen to select each item. Select change in the box for each item and press the LCD
screen. Change the page using the or button on the upper section of the screen.
1-7-1 WAVELENGTH
The following items are changed by setting “WAVELENGTH.
d LINE → The measured value based on the “d” line (587.56mm) as the reference wavelength, is
displayed.
e LINE → The measured value based on the “e” line (546.07mm) as the reference wavelength, is
displayed.
1-7-2 LANGUAGE
Ten languages can be selected for the data on the screen. They can be changed from one to another by
setting “LANGUAGE”
For more information, refer to the separate sheet “TRANSLATION OF MENU SCREEN FOR CL-300”.
1-7-3 RS-232C
Normally, select “NORMAL”.
“CL-2000NEW” is applicable to the equipments connected to CL-2000. Select it if a trouble occurs in
“NORMAL”.
1-7-4 DIOPT CNV
Priority is given to the step change or frequency change by setting “DIOPT”.
STEP PRIORITY: When selected, the priority is given to step change.
TRNS PRIORITY: When selected, the priority is given to frequency change.
SPECIAL
WAVELENGTH：
LANGUAGE：
RS232C：
DIOPT CNV：
BARCODE：
MACHINE：
1/４
To Next Page
Loading...
Need help?
General
