3.4. Setting output configuration
14
3.4. Setting output configuration
Output configuration determines changes to the application rate.
1.
Select and select Output Configuration .
l Output Scale: An Output Scale of 100% means that the
prescription defined in the source will be used directly. However,
depending on weather conditions, the operator may choose to
increase or decrease the rate of application. Changing this
percentage provides a uniform rate change for all defined rates.
The adjusted rate percentage is displayed on the main screen.
Scale is limited to between 50 - 150%.
l Output Scale Increment: This allows the rate to be adjusted via
the plus and minus buttons on the main screen, as
required. The value entered here defines how much the rate will
To Next Page
Loading...
