10
Introduction
Measure key (appears as in this manual)
Starts measurement.
(See "3.3 Operating Keys".)
Horizontal fine motion knobs (both sides)
Use these knobs to finely adjust the instrument's horizontal
position.
Data output connector
You can connect a data collector or computer to this connector.
Leveling foot screw
Base plate
Horizontal circle positioning ring
You can rotate the horizontal scale while the instrument is fixed
in position. Use to align benchmarks with '0', etc.
Horizontal circle
Reticle adjusting screw and screw cover
Use this screw to mechanically adjust the reticle.
Battery cover
Eyepiece
Adjust the reticle focus to suit your eyesight.
Keyboard (See "3.3 Operating Keys".)
Display (See "3.2 Display".)
Gunsight
Use for coarse adjustment of the orientation of the instrument.
DL502-503.book 10 ページ ２０１０年４月５日 月曜日 午前９時４７分
To Next Page
Loading...
Need help?
General
