32
Surveying
8.3 Double-run Measurement
You can set single-run or double-run measurement data as
additional information. When data is sent, you can
distinguish single-run from double-run measurement data.
In menu mode, select "REC" and then "Line."
* Go: Record sent data
Return: Record returned data
8.4 Flow of Recording Data
The following explains the flow of recording measurement
data. When using the numerical scale side of the staff and
not the RAB code, manually input the measurement data.
A detailed explanation is provided below for items indicated
by a *.
Note:
When "Return" is selected, "*" is displayed in front of measurement
value Rh.
DL502-503.book 32 ページ ２０１０年４月５日 月曜日 午前９時４７分
To Next Page
Loading...
Need help?
General
