Topcon DL-502 User Manual

33
Surveying
The following procedure is an example of measurement in height
difference measurement mode.
• Setting the point number
1 Press when measuring the
backsight point.
The point number can now be set.
Set the backsight point
number*
Measure the backsight
point
Check and record the
measurement results
Set attributes of foresight
point*
Set the point number of the
foresight point*
Measure (foresight) point
Check and record the
measurement results
Move the instrument point
Measure previous point as
backsight point
Measure next foresight
point
Procedure
DL502-503.book 33 ページ ２０１０年４月５日 月曜日 午前９時４７分

Topcon DL-502 Specifications

General

Brand	Topcon
Model	DL-502
Category	Laser Level
Language	English