Topcon FC-500 - Connecting to a Wi-Fi Network

50 FC-500 Handheld Field Controller Owner’s Manual
Wi-Fi Wireless Networking
The FC-500 has built-in Wi-Fi wireless networking to connect
to the Internet or a ofce network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access
point to make a connection. To actively look for a network
connection complete the following steps:
1. From the Home screen, turn Wi-Fi on by tapping the
Wi-Fi gadget . The FC-500 automatically starts
scanning the area for available Wi-Fi networks. (If Wi-Fi is
not on the Home screen, open the Start screen, and
select Getting Started. Select Set up Wi-Fi or press Start >
Settings > Connections > Wireless Manager.)
2. Tap-hold the Wi-Fi icon on the Home screen to go to
the Wi-Fi control panel. When the handheld completes