Charging the Batteries
P/N 7010-1022 www.topconpositioning.com
29
Charging with the Battery Charging Cradle
1. Remove the batteries from the receiver and insert them
into the charging cradle.
2. Connect the power cable to the power supply unit.
3. Connect the SAE connectors on the power adapter cable
and power supply unit.
4. Connect the power adapter cable to one of the ports on
the charging cradle (either port will charge both/either
battery).
5. Plug the power supply to an available outlet.
Charging Temperatures
Charge the batteries only in temperatures between
32
o
F (0
o
C) and 113
o
F (45
o
C). This is important to prevent
To Next Page
Loading...
