Topcon GR-5 - Step 4: Collect Data (for Base and Rover)

Post-Processing Survey
P/N 7010-1022 www.topconpositioning.com
39
to the Slant Height Measurement Mark (SHMM) on
the side of the enclosure.
2. Record the antenna height, points name, and start
time in the field notes.
Step 4: Collect Data (for Base and Rover)
1. Turn on the receiver. The STAT (status) light
(LED) initially blinks red.
Vertical Height
to ARP
Station Marker
or
Tip of RTK Pole
Slant Height
to Base of
Corner on
Gray Bumper
85.0mm
168mm
228mm228mm228mm228mm228mm228mm253.0mm
A
B
A = ARP to edge = 79.0
B = ARP to corner = 97.5