Topcon GR-5 - Maintenance; Restoring Default Settings; Performing Hardware Reset

Chapter 5
P/N 7010-1022 www.topconpositioning.com
49
Maintenance
Restoring Default Settings
Most of the settings in the GR-5 have default values, which
you may change as needed for your particular application.
You can always return the receiver to a known operating
condition by restoring its default configuration.
To restore default settings, run TRU and select
ToolsFactory Reset.
Performing Hardware Reset
You can reset the GR-5 without returning any configured
settings to their default values. It may become necessary to
reset the GR-5 to apply certain settings which require a
hardware reset or as part of troubleshooting.
To reset the receiver, run TRU and select ToolsReset
Receiver.