Post-Processing Survey
P/N 7010-1022 www.topconpositioning.com
37
Step 2: Set up the GR-5 Rover
1. If needed, attach the quick disconnect to the bipod/
range pole.
Use a bipod during post-process surveys to
ensure the antenna/receiver does not move
during data logging.
2. Attach the GR-5 receiver to the quick disconnect.
Make sure the receiver locks into place.
3. Attach the antenna to the modem antenna
connector. This step ensures the safety for the
modem board, even if you does not use it for
receiving data.
To Next Page
Loading...
