Troubleshooting
NET-G3A Operator’s Manual
5-6
D Poor satellite geometry (PDOP/GDOP values are too high).
Conduct your survey when PDOP values are low.
D The elevation mask is above 15 degrees.
Lower the elevation mask. See page 3-5 for information on
setting the elevation mask.
The receiver does not start data logging.
D The receiver has no memory card installed or the memory
option is disabled or expired.
• Check that the card is properly inserted. For details, see
“Installing the CF Card” on page 2-8.
• Check that the memory option is enabled. For details, see
“Checking the Receiver’s OAF” on page 4-14.
D The receiver’s memory card has no free space.
• Download and/or delete data files to free up space for new
files (see “Downloading Data Files from an Installed
Memory Card” on page 4-1 and “Deleting Data Files from
an Installed Memory Card” on page 4-8).
• Use the AFRM feature. See “Automatic File Rotation
Mode (AFRM) parameters” on page 3-12.
Net-G3A_OM_Book.book Page 6 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
Need help?
General
