Topcon Net-G3 - Page 123

Receiver Specifications
P/N 7010-0935
A-5
Data Features
Up to 50 Hz update rate for real time position and raw
data (code and carrier)
10cm code phase and 0.1mm carrier phase precision
RTCM SC104 version 2.1, 2.2, 2.3, and 3.0 I/O
Multiple Base RTCM
Geoid and Magnetic Variation models
Different DATUMs support
Output of grid coordinates
CMR and CMR+ support
NMEA
NMEA version Ver. 2.1, 2.2, 2.3, 3.0, 3.01 output
Messages GGA, GLL, GMP, GNS, GRS, GSA, GST, GSV, HDT,
RMC, ROT, VTG, ZDA, UID and P_ATT
Output interval 1Hz standard; 5, 10, 20, and 50 Hz optional
DGPS
Correction format RTCM SC104 Ver 2.1, 2.2, 2.3
RTCM message
type
1, 3, 9, 31, 32, 34; user selectable
Process interval 1Hz standard; 5, 10, 20, 50 Hz optional
Output interval for
RTCM correction
data
1Hz standard; 5, 10, 20, 50 Hz optional
Elevation mask
0 to 90 deg (independent of data logging)
Multi-base DGPS Differential correction select mode: Nearest, Mix, Best
(optional)
RTK
Correction formats CMR/CMR+ (Trimble compatible); RTCM SC104 Ver
2.2, 2.3, or 3.0; TPS
RTCM message
type
3, 18, 19, 20, 21, 22, 23, 24 by rover; 3, 18, 19, 22, 23, 24
by base; user selectable
Table A-1. Receiver General Specifications (Continued)
Net-G3A_OM_Book.book Page 5 Thursday, May 14, 2009 8:49 AM