37
7. BASIC OPERATION
When is displayed on the status bar of
the total station companion device, the Remote
Controller is currently paired to different device.
Press the SEARCH button to switch the
pairing from the current device to the next
locally available device. If is displayed
after a brief period, press the FAR button
to confirm the pairing. If however,
continues to be displayed, press the FAR
button until the status bar icon changes. If
the SEARCH button is pressed as many
times as there are locally available devices and
the status bar icon still does not change, an
audio tone sounds continuously and the
Remote Controller automatically powers off.
The wireless device for the total station was not
found. Check communication settings and
conditions.
"2. PRECAUTIONS Precautions
concerning Bluetooth wireless technology",
"6. SETTINGS FOR THE TOTAL STATION"
To Next Page
Loading...
