39
7. BASIC OPERATION
• When the laser beam from the Remote Controller is reflected off a unrelated object the total station
completes Turning operation pointing at this object instead of the Remote Controller. When this
happens, press and hold the SEARCH button to nullify the current measurement position and
continue Turning operation.
The Bluetooth wireless modem incorporated in the Remote Controller allows simultaneous
communication between the Remote Controller and both the total station and data collector. COM1 is
designed for long-range (line-of-sight distance up to 300m) communication with the total station.
COM2 is for communication with data collectors. COM2 usable range varies depending on the usable
range of the companion device.
Bluetooth connections
Communication between a pair of Bluetooth devices requires one device to be set as the "Master"
and the other as the "Slave". To initiate connections from the total station side, set the total station
as the "Master" device. To initiate connections from the paired device side, set the total station as
the "Slave" device. The factory setting for the total station is "Slave".
Bluetooth connections are as follows:
COM1: Total station (Slave) - Remote Controller (Master)
COM2: Data collector (Master) - Remote Controller (Slave)
7.4 Communication Status
COM2
RC Handle
Slave
COM1
Master
Slave
Master
To Next Page
Loading...
