Topcon RC-5A - 13. BUTTON OPERATIONS LIST; POWER ON;OFF Operation; Mode Setting Operations; Turning Operation Controls

48
11. SPECIFICATIONS
Whole System Specifications
Range: (Slope distance between instrument and measuring point)
(normal atmospheric conditions
*1
)
Standard Mode: 2
*2
to 100m
*3
Far Mode: 2
*2
to 250m
*4
/300m
*3
Operating time
*5
: About 15 sec.
*1
/18 sec.
*6
Up to finishing distance measurement
(Rapid (single))
Operating range of function for automatically determining rotation direction:
Magnetic inclination is 80° or less and horizontal component is
more than 10µT
*7
Data collector: TOPCON total station-compatible product
*7
Control panel (keyboard) 3 Keys
Indicator 5 LED
Audio tone Yes
Operating temperature -20 to 50°C
Storage temperature range -30 to 70°C
Water resistance IP65 (IEC 60529:2001)
Size 69 (L) X 80.5 (W) X 131 (H) mm (excluding antenna)
Weight About 420 g (with BDC46C)
*1: Normal: Slight haze, visibility about 20 km, sunny periods, weak scintillation.
*2: Possible to use 1.8m (horizontal distance), height of instrument point and measurement point
is almost the same, instrument height is 1.5m, and prism height is 0.10m.
*3: About 20m height difference between instrument and Remote Controller laser projection port.
*4: About 40m height difference between instrument and Remote Controller laser projection port.
*5: Time taken between the start of the search and the obtaining of distance measurement results
after the completion of Auto Pointing. Normal atmospheric conditions, instrument Turning
horizontally 90°, 100m distance between instrument and measuring point.
Depends on the conditions and wireless modem used.
*6: At a distance of less than 5m, pole leaning slightly.
*7: For details, contact your local dealer.
Remote Controller (RC-5A)
Laser Projection Port
Signal source Laser diode (IEC60825-1 Ed. 3.0: 2014/FDA CDRH 21 CFR Part
1040.10 and 1040.11 (Complies with FDA performance standards for
laser products except for deviations pursuant to Laser Notice No.50,
dated June 24, 2007.))
Wavelength: 785nm
Beam projection area
Horizontal direction: -10 to 10°
Angle of elevation: More than 30°
Angle of depression: More than 30°
Rotation direction detector
Direction detector magnetic compass sensor (geomagnetic measurement method)
With automatic/manual calibration function