Topcon RL-200 2S User Manual

25
Battery Status Display
Remaining battery level is displayed at the lower bar in the display area.
For handling batteries, see the “Maintaining Power Sources” on page 37.
If an AC/DC converter is connected to the main instrument
when the main instrument is displaying “RL BATTERY LOW”,
the remaining battery level display will not change.
Once the power is turned off, the battery remaining display
will reset.
Battery remaining display
Rotating laser display: RL
Remote controller display: RC
RL BATTERY LOW
or
RC-400 BATTERY LOW
(Displayed on the RC-400 only)
: Battery is sufficient.
: Battery is sufficient.
: Battery is sufficient.
: The power is low, but laser is still usable.
(Indication continues until batteries are dead.)
: Dead batteries of RL-200 2S or RC-400. Recharge
the battery or replace the dry batteries with new ones.

Topcon RL-200 2S Specifications

General

Brand	Topcon
Model	RL-200 2S
Category	Laser Level
Language	English