Topcon RL-200 2S User Manual

52
LS-80L Display
Normal precision mode
High precision mode
Higher than datum position
(Buzzer sound:High frequent beep sound)
Move the sensor downward.
Datum position
(Buzzer sound:Continuous beep sound)
Lower than datum position
(Buzzer sound:Low frequent beep sound)
Move the sensor upward.
Battery remaining display
Height alert warning of rotating
laser
*1
Rotating laser battery warning
*2
The warning displays *1 and *2 are the functions that
the LS-80L detects alarm signal from the RL-200 2S.
The LS-80L can be canceled the alarm detection from
the RL-200 2S.
To be canceled the detection; Press the power switch
while pressing the buzzer sound switch when powering
on.
Battery is sufficient.
The power is low, but laser
is still usable.
Dead battery.
Replace the dry battery with
new one.
A flash shows that the RL-200 2S
power is low.
A flash and a buzzer sound
signifies that the height alert
function of the RL-200 2S is
operating.

Topcon RL-200 2S Specifications

General

Brand	Topcon
Model	RL-200 2S
Category	Laser Level
Language	English