2
1-2 Precautions for Repairs
(1) Disassemble, assemble, repair or adjust the optical system in the clean area where no dust or foreign mat-
ter will affect the instrument.
(2) For assembly and inspection, refer to the assembly and instruction manual of SL-D7.
(3) When repairing this instrument, use proper materials and tools correctly according to this manual.
(4) As a rule, a metallic part should be replaced as a single part and an optical part as a unit in this manual.
(5) Refer to the service parts list for the disassembly or assembly of the component not mentioned in this
manual.
(6) Don’t use other lubricating oils or adhesives except those specified.
(7) Order repair parts according to the service parts list.
To Next Page
Loading...
Need help?
General
