Topcon TP-L5 SERIES - Battery Holder DB-53 (Dry Battery Holder) *Optional Accessory; Removing the Battery; Replacing the Dry Cell Batteries

5. USING THE BATTERY
29
 Removing the battery
1
Turn the battery knob to "OPEN", lift and remove the
battery holder DB-53.
 Replacing the dry cell batteries
1
Open battery holder DB-53 by turning the lid knob to
"OPEN".
2 Remove the old batteries and replace with new
batteries (4xD size dry cell batteries) matching [+]
and [-] as shown in the figure. Close the battery
cover by turning the knob to "LOCK".
3 Insert the battery holder into the instrument. Secure by turning the knob to "LOCK".

• Replace all 4 batteries with new ones at the same time.
• Insert the batteries in the battery box according to the appointed direction.
• Do not mix used and new batteries, and do not mix different types of batteries together.
5.2 Battery Holder DB-53 (Dry battery holder) *Optional accessory
DB-53