7. STANDARD ACCESSORIES
49
Replacing battery for Remote Control, RC-200
1
Lift the battery cover on the back of the remote
controller RC-200 is lifted up slightly by pressing
toward the direction of the mark . When the
lid lifts up, take it out.
2 Replace the 4 old AAA alkaline batteries with
new ones.
3 Click to close the lid by pressing on it.
• Replace all 4 batteries with new ones at the same time.
• Insert the batteries in the battery box according to the appointed direction.
• Do not mix used and new batteries, and do not mix different types of batteries together.
To Next Page
Loading...
