6. BASIC OPERATION
39
Automatic alignment with the target (TP-L5GV/G/AV/A only)
When the alignment is placed on centerline so it is in the alignment path of the beam, the laser
will search the horizontal center of the target and automatically align the beam to it. Set the
alignment target as follows and press the automatic alignment key on the instrument or the RC-
200 remote control. The instrument starts automatic alignment and the following display is
shown.
• This function is helpful for second day set ups.
・ Automatic alignment is not possible when the instrument is locked.
Detection strips
Laser receiving side
Automatic alignment key
To Next Page
Loading...
