8. CHANGING OPERATING PARAMETERS
54
*1 "V-LED" is indicated when the TP-L5G/BG/A/B is used.
4 Press SET key to accept new setting.
5 Press [ ] key to select [---].
6 Press SET key to accept new setting.
Display will change to operating
mode. The unit will now operate with
the new parameter settings (level vial
indicator enlarged on power-up and
centerline LED always on).
PARAMETERS
R-TILT DISPLAY
V-LD - - - [ 30 ]
PARAMETERS
R-TILT DISPLAY
V-LD - - - [ 30 ]
To Next Page
Loading...
