Topcon TP-L5 SERIES - Troubleshooting; Troubleshooting Laser Beam Output

8. CHANGING OPERATING PARAMETERS
64
How to correct a character
Procedure Key operation Display
1 Select the left or right arrow by
pressing the [ ] or [ ] keys.
2 Press [SET] key.
The underline (cursor) moves to left
or right by pressing the SET key.
3 Select a character string by
pressing the
[ ] or [ ] keys.
or
_ _ _ _ _ _ _ _ _ _ _ _ _ _
LASOR(1) _ _ _ _ _ _ _
=
.
.
.
.
.
_ _ _ _ _ _ _ _ _ _ _ _ _ _
LASOR(1) _ _ _ _ _ _ _
=
_
_ _ _ _ _ _ _ _ _ _ _ _ _ _
LASOR(1) _ _ _ _ _ _ _
=
_
or
_ _ _ _ _ _ _ _ _ _ _ _ _ _
LASOR(1) _ _ _ _ _ _ _ _
ABCDEFGHIJ ←→ SET
_