4 Introduction
1.2.2 The remote control
1
button switches the digital re-
ceiver between standby mode and
operation mode. (On/Off)
2
button mutes the sound. Press
again to switch it back on.
3
UHF button is not used in this
model.
4
button switches the output of
the TV SCART socket between the
digital receiver and the device con-
nected to the VCR SCART socket.
See § 3.2.3 for more description.
5
button sets a sleep timer.
6
Numeric buttons are used to enter
service numbers and menu options.
7
button switches between the
current service and the previously
viewed one.
8
button displays more informa-
tion about the current program or
a program highlighted in the elec-
tronic program guide.
9
GUIDE button displays the electronic program guide. (EPG)
10
button switches between television services and ra-
dio services.
11
MENU button displays the main menu. It is also used to
return to the previous menu from a submenu.
12
button is used to select an audio track and sound
mode, or a video track of multifeed program.
To Next Page
Loading...
