1.2 Controlling the digital receiver 3
1.2.1 The front panel
The front panel of the digital receiver has buttons to control
the digital receiver, and specific lamps and a display to indi-
cate its status. The following indicates what they mean:
STANDBY button switches the digital receiver between standby
mode and operation mode. (On/Off)
CHANNEL
a
,
c
buttons move to the next or previous ser-
vice. They are also used to navigate in the menus and
interactive screens.
VOLUME
b
,
d
buttons increase and decrease the volume.
They are also used to change options for a menu item.
Front display displays the current time in standby mode,
and displays the current service and status of the dig-
ital receiver in operation mode.
To Next Page
Loading...
Need help?
General