22 Preference Settings
enjoy only one source or both of them in either stereo or mono.
Set the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the button. See § 5.2.3 for detailed description.
3.3 Local time setting
You should set your local time for timer events. If you did
not set the local time right, the program time table provided
by the electronic program guide may also be distrustful. Refer
the electronic program guide to § 5.3.
Select the System Setting > Lo-
cal Time Setting menu.
You can set the local time either as Manual or Auto using Green-
wich Mean Time (GMT). However, it is recommended to use
the auto setting.
To set the local time using the auto setting, follow these steps:
1. Set the Mode option to Auto; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 3.1.
3. Make sure that your local time is correctly displayed on
the Local Time option.
To Next Page
Loading...
Need help?
General