30 Service Search
For example, to select the antenna con-
nected to the A5 input in the left fig-
ure, set the DiSEqC 1.1 option to 2 of
4 and the DiSEqC 1.0 option to 1 of 4.
If you have a mini DiSEqC 1.0 switch
which has only two inputs, you should
set the DiSEqC 1.0 option to Mini A in-
stead of 1 of 4.
4.1.2 Configuring DiSEqC 1.2 settings
Your motorized antenna will turn toward your desired satel-
lites horizontally by DiSEqC 1.2.
When you switch to an service, if the service is
provided by a satellite other than current one,
it will take longer time than usual because the
antenna has to turn to its position.
To use DiSEqC 1.2, select the In-
stallation > Motorized DiSEqC
1.2 menu.
At first you have to set the Mo-
torized DiSEqC 1.2 option to
Enable.
To get the correct position of your desired satellite, perform
the following steps:
To Next Page
Loading...
