72 Recording and Playing
3. Press the
OK button to start playback.
4. To stop playback, press the button.
To play all MP3 files in a subfolder, put the highlight bar on a
desired folder, and press the button.
7.7 Transferring recording files
You can transfer files between the digital receiver and your
computer via USB connection with Altair, which is a program
used to transfer files. You can download it from the the Top-
field web site, http://www.i-topfield.com.
To transfer files, take the following steps:
1. Download the Altair program and the
USB driver from the Topfield web site.
2. Install them on your computer
3. Plug one end of a USB cable into the USB
port on the digital receiver, and the other
end into the matching port on your com-
puter.
4. Turn on the digital receiver.
5. Run Altair, then its screen will appear like
the figure below.
To Next Page
Loading...
Need help?
General