54 Listing Services
entry by pressing the OK button on the box, you should con-
figure LNB settings for the new one. Refer LNB settings to
§ 4.1.1.
To delete a satellite entry, choose your desired satellite entry at
the Satellite drop-down list box, and then select the Function
> Satellite, TP > Delete Satellite menu. When a box appears
asking for your confirmation, the selected satellite entry will
be deleted by pressing the Yes button on it.
To modify a satellite entry, choose your desired satellite entry
at the Satellite drop-down list box, and then select the Func-
tion > Satellite, TP > Edit Satellite menu. How to modify is
the same as in adding a new satellite entry.
To add a transponder entry, select the Function > Satellite, TP
> Add Transponder menu. Then a box appears, in which you
should specify frequency, symbol rate, polarity and stream
identification for your new transponder. Pressing the OK but-
ton will save a new transponder entry.
To delete a tansponder entry, choose your desired transponder
entry at the TP List list box, and then select the Function >
Satellite, TP > Delete Transponder menu. When a box ap-
pears asking for your confirmation, the selected transponder
entry will be deleted by pressing the Yes button on it.
To modify a transponder entry, choose your desired transponder
entry at the TP List list box, and then select the Function >
Satellite, TP > Edit Transponder menu. How to modify is the
same as in adding a new transponder entry.
6.4.2 Editing television and radio service list
To edit the television service list, you have to press the F2 key
on your keyboard in the first place. Then related menus will
become enabled.
To Next Page
Loading...
Need help?
General